污泥螺旋压榨脱水机/ Sludge Screw Press Hydrating Machine
用 途 :
对造纸污泥产生压缩作用,达到脱水目的。与浓缩机匹配形成的污泥脱水系统对污泥压缩浓度达48-50%;压缩后的污泥 可进入焚烧炉进行燃烧。
结构特点:
根据不同原料和产能的要求,设计不同规格锥形压缩螺旋,配有小孔径的脱水筛框。物料出口装有反压装置,通过调整气控压力调节出料通道大小进一步提高物料浓度。要使物料达到可焚烧程度,在设备前要有与其匹配的浓缩机同时通入适量的蒸汽。
本设备性能稳定,运行成本低,可对不通用户进行设备的灵活配置。
Application:
Compression effects on sludge from paper making for dewatering. The
consistency will be 48-50%, the compressed sludge can be burn.
Design Features:
For the requirement of different material and capacity, we design different
cone screw including dewatering basket. Con- press device rise up the
consistency of material.
To bring the material to burn level, need some steam when processing. This
equipment running stable, low cost and flexible configuration.
主要技术参数 / Main Technical Data
螺旋直径screw diameter
|
|
Φ500
|
Φ650
|
Φ750
|
Φ900
|
Φ1100
|
Φ1250
|
Φ1400
|
|
型号Model
|
ZNV500N
|
ZNV650N
|
ZNV750N
|
ZNV900N
|
ZNV1100N
|
ZNV1200N
|
ZNV1400N
|
污泥浓度
sludge consistency
|
进泥浓度inlet consistency
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
|
出泥浓度outlet consistency
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
产能Capacity(t/24h)
|
|
2~8
|
10~20
|
15~30
|
20~40
|
35~50
|
40~65
|
55~85
|
装配电机功率Motor power(Kw)
|
|
5.5
|
11
|
15~18.5
|
22~30
|
30~45
|
55~90
|
75~110
|
依泥种,要求不同,产量有变动。如工艺需求低进泥浓度或更高出泥浓度,参数可另行设计。
The Capacity shall be subject to type of sludge and requirements. The machine
can be in customerized design if requested for lower inlet consistency or higer
output consistency.